What You Get in This DWG File

The file contains 9 sheets and each sheet covers one valve family. Every block already carries its size tag (DN or inch), and most valves are drawn in two or three views — plan (top), elevation (front) and end view — so you can use them directly in both section drawings and riser diagrams.

1. Gate Valve CAD Blocks (DN15 – DN200)

This sheet has two sets. The first set is orthographic (top view plus front view with size tags) for use in floor plans and sections. The second set is pictorial (DN50, DN65, DN80, DN100, DN150, DN200), which works well in riser diagrams and presentation drawings.

In practice, valves up to DN50 (2″) are generally bronze screwed gate valves, and DN65 and above are cast iron or ductile iron flanged. Flange drilling follows ANSI B16.5 Class 150 or EN 1092-1 PN16, and face-to-face length follows ASME B16.10. Fire fighting systems use OS&Y (Outside Screw & Yoke) rising stem gate valves because NFPA 13 requires water supply control valves to be of the indicating type and electrically supervised with a tamper switch. When you insert the block, leave clear space for the stem travel — otherwise it fouls the ceiling on site.

2. Balancing Valve CAD Blocks (Screwed & Flanged)

Double Regulating Valves (DRV) are used for flow balancing in chilled water and LPHW systems. The blocks clearly show the pressure test point nipples and the handwheel with its position indicator, which makes them very useful in AHU and FCU branch details.

Always show the balancing valve on the return line unless the project specification says otherwise, and keep a minimum of 5×D straight pipe upstream — without it the flow measurement will read wrong. Note that the valve can be smaller than the pipe, because selection is based on Kv and design flow, not on pipe diameter. Include valve size, design flow (l/s) and pre-set value columns in your schedule table; the TAB contractor commissions the system from exactly that data.

3. Ball Valve CAD Blocks (Bronze & Iron)

Bronze screwed ball valves up to DN50 are the standard choice for domestic water and small branch isolation. These blocks include the lever handle swing, which matters more than it looks — lever operating space is usually the first thing to clash during coordination near shafts and ducts. The iron flanged set also includes the end view with bolt circle, which adds good detail to pump room sections.

One design note: a ball valve is meant for isolation, not throttling. A partially open ball valve damages its seat quickly and generates noise. Show a globe or butterfly valve where throttling is required.

4. Butterfly Valve CAD Blocks (DN65 – DN600)

This is the most used sheet of the set, because butterfly valves are the backbone of both chiller plant rooms and fire pump rooms. The blocks are drawn in three views — plan, elevation and disc face with bolt holes.

Rule of thumb: lever operation works up to DN200, and DN250 and above should be gear operated, since manual lever torque is no longer practical at that size. The gearbox handwheel radius is already included in the block, which makes it easy to show a 600–750 mm clear access aisle in the plant room layout. In fire service, lug type is preferred over wafer type so the valve stays tight on the line even when downstream piping is dismantled, and the valve should be UL/FM listed with a supervisory switch.

5. Check Valve CAD Blocks (Swing, Wafer & Screwed)

Showing the wrong check valve orientation at the pump discharge is a very common drawing mistake, so always keep the flow arrow visible. Swing check valves work best in horizontal lines; in vertical lines they should only be used with upward flow, and even then a spring-loaded silent check is better because it significantly reduces water hammer when the pump trips.

NFPA 20 requires a check valve at the fire pump discharge, and a wafer type dual-plate check saves length where the pump room is tight. For detailed check valve blocks and installation notes, see the dedicated post: Check Valve CAD Blocks Free Download.

6. Flexible Connector, Air Vent, Foot Valve & Water Meter

This sheet is a lifesaver for pump room detail drawings. A rubber twin-sphere flexible connector goes on both the suction and discharge of the pump to absorb vibration and minor misalignment — draw it right at the pump nozzle, and mark the control rods or anchor point immediately after it.

Automatic air vents go at every high point of a chilled water system and at the top of AHU coils. A foot valve is used when the pump works under suction lift conditions (tank below, pump above). The water meter blocks are screwed type, used on incoming domestic supply and for sub-metering — remember to show the upstream strainer and isolation valves on both sides.

7. Pressure Relief Valve Detail

This is a high-detail block, so use it on detail sheets at 1:10 or 1:20 scale rather than on a floor plan. In a fire pump installation, NFPA 20 requires a circulation relief valve on electric motor-driven pumps, and a main pressure relief valve where the churn (shut-off) pressure could exceed the rated working pressure of the system. Its discharge must be routed through a visible waste cone to the drain, and that routing should be shown on the drawing.

8. Pressure Reducing Valve Detail (Pilot Operated)

Without pressure zoning in a high-rise building, fixtures on the lower floors cannot survive 8–10 bar of static pressure. A pilot operated PRV station is typically drawn as strainer, upstream isolation valve, PRV, downstream isolation valve, pressure gauges on both sides, and a bypass line. For standpipe systems, NFPA 14 requires pressure regulation at hose connections where static pressure exceeds 12.1 bar (175 psi).

Download — Valve CAD Blocks DWG (Free)

File format: .DWG (AutoCAD 2007 compatible) · Units: mm · Layers: separate valve layer · License: free for personal and professional project use.

How to Use These Blocks in AutoCAD

1. Download and extract the file — unzip it into your project folder.
2. Open the DWG and run the UNITS command to confirm the insertion unit is millimeters. If your drawing is set in meters, insert with a scale factor of 0.001.
3. Insert the block — either copy and paste (Ctrl+C / Ctrl+V), or use ADCENTER (DesignCenter) to drag blocks straight into your drawing. For repeat use, dragging them onto a Tool Palette is fastest.
4. Assign the correct layer — move the block onto your project layer (for example M-PIPE-VALV or FP-VALVE) and keep properties ByLayer so plot styles stay consistent.
5. Set the scale — scale symbol blocks to suit your drawing scale (a symbol sized for 1:100 will look small in a 1:50 plan), while detail blocks such as the PRV and relief valve stay at real size.
6. Build your own template — save all frequently used blocks into a company DWT template, and run PURGE before saving to drop unused blocks and cut file size dramatically.

Shop Drawing Tips From the Field

• Give every valve a unique tag (for example GV-CHW-01) and put a valve schedule table on the drawing — consultant approval moves much faster.
• Never show a valve tight against a wall, beam or ceiling. Leave at least 300 mm clearance for the handwheel or lever and 600 mm of access in front of it.
• A butterfly valve sits between two flanges — do not give it a gate valve’s spool length, or the pipe will come up short on site.
• Keep valve blocks on one layer and never explode them. Once exploded, a global symbol update across all valves becomes impossible.
• Run -PURGE and AUDIT before every approval submission.

Frequently Asked Questions

Are these valve CAD blocks free?

Yes, these blocks are completely free to download and you can use them in both personal practice and professional project drawings. Reselling the file is not permitted.

Which AutoCAD version will open this file?

The file is saved in AutoCAD 2007 format, so it opens in AutoCAD 2007 through the latest release, and also in alternatives such as BricsCAD, ZWCAD, GstarCAD and DraftSight.

What units are the blocks drawn in?

All blocks are drawn in millimeters, which is the standard for Gulf region and most international MEP projects. When inserting into a meter-based drawing, use a scale factor of 0.001.

Do these include 3D valve models?

No, these are all 2D blocks — plan, elevation and end views. They are made for shop drawings, sections and riser diagrams, not for BIM modelling.

How does a gate valve differ from a butterfly valve on a drawing?

A gate valve has a much longer face-to-face dimension and its rising stem needs clearance above it, while a wafer or lug butterfly valve sits between two flanges and takes very little length — but its gearbox or lever needs clearance at the side. Both need different clearances shown during layout coordination.

Is the balancing valve always the same size as the pipe?

Not necessarily. A balancing valve is selected on required flow and available pressure drop (Kv value), so it is often one size smaller than the pipe. Show the reducer followed by the valve on the drawing.

This DWG file contains a complete library of professionally drafted check valve AutoCAD blocks, covering every type you need for plumbing, HVAC and fire fighting shop drawings — swing check valves (flanged & screwed), wafer check valves, bronze and iron body valves from DN15 up to DN450.

Each valve is drawn to catalog dimensions in elevation (E), plan (P) and section (S) views, so your valve schedules and coordination drawings stay dimensionally accurate. Blocks follow standard manufacturer proportions (KITZ-pattern bronze and iron ranges) and can be inserted directly into your project drawings without modification.

What’s Inside the DWG File?

• Bronze screwed check valves — DN15 to DN80 (elevation + plan views)
• Swing check valves, flanged — DN65 to DN200 (elevation + plan views)
• Swing check valves, screwed — DN18 to DN80 (elevation, plan + isometric-style views)
• Iron body check valves — DN65 to DN450 (plan + section views)
• Wafer check valves — DN65 to DN200
• Clean DWG structure, blocks drawn 1:1 in millimetres
• View prefixes labelled per size (E = elevation, P = plan, S = section)

Technical Specifications

Check Valve Size Coverage

Why Use These Check Valve Blocks?

• Save time — stop redrawing valves for every shop drawing
• Dimensionally accurate valve schedules and coordination sections
• All views (elevation/plan/section) in one file for plans, risers and details
• Consistent valve symbols across your whole project drawing set

Who Should Download?

• MEP Draftsmen & BIM Technicians
• Plumbing & Fire Fighting Design Engineers
• HVAC Engineers preparing plant room details
• QA/QC Teams verifying valve schedules
• Trainee Engineers building their CAD libraries

How to Use the Blocks

Open the DWG, select the block for your valve size and view, press Ctrl+Shift+C (copy with base point), then paste into your project drawing. Blocks are drawn at 1:1 in millimetres, so they inherit your current layer properties on insert. The label under each block tells you the view and size — for example, E100 is the elevation view of the DN100 valve, P100 the plan view, and S100 the section.

Download Check Valve CAD Blocks – DWG

Click below to download the complete check valve AutoCAD block library in DWG format.

Don’t have AutoCAD installed? See our guide: 5 Free Ways to Open DWG Files Without AutoCAD.

Related Posts

• AutoCAD Drainage Fittings Section & Typical Details DWG Free Download
• Fire Fighting Dynamic Blocks & Standard Details DWG Free Download
• Basement Water Supply Shop Drawing Free Download

Final Words

This check valve block library is part of a real-world drafting collection used in professional MEP projects. Whether you are preparing plumbing risers, pump room details or fire fighting layouts, having every check valve size and view in one DWG keeps your drawings fast and consistent. Download it, add it to your CAD toolkit, and explore our free online MEP calculators for pipe and pump sizing.

Looking for a clean, ready-to-use PP-R fittings CAD blocks free download? This DWG package gives you a complete set of dynamic AutoCAD blocks for PP-R piping — elbows, tees, reducing tees, up and down elbows, and PPR pipes — all built to real dimensions and scalable to every standard size from 20 mm to 160 mm.

Instead of maintaining 50 separate blocks for 50 different diameters, you insert one smart block and pick the size from a dropdown. Your drawing stays light, your layers stay clean, and your water supply shop drawings get finished a lot faster.

What Is Inside This PP-R Fittings CAD Blocks Free Download?

Every symbol in this file is a dynamic block, which means one block handles all diameters through visibility states, lookup parameters and stretch actions.

Dynamic PP-R Fittings Included

• PP-R Elbow 90° — plan and elevation views, all sizes
• PP-R Elbow 45° — for offsets and angled runs
• PP-R Equal Tee — branch connections on risers and mains
• PP-R Reducing Tee — main size and branch size selected independently
• PP-R Up Elbow (riser up) — standard plan symbol
• PP-R Down Elbow (riser down) — standard plan symbol
• PP-R Reducer / Coupling — concentric size change
• PP-R Pipe — single-line and double-line, stretchable to any length

PP-R Pipe Sizes Covered

Why Use Dynamic PP-R Blocks Instead of Static Ones?

1. One Block, Every Size

Select the block, open the lookup parameter, choose 20 mm or 110 mm — the geometry updates instantly. No re-scaling, no exploding, no distorted text.

2. Smaller, Faster Drawings

A single dynamic definition replaces dozens of static blocks. File size drops, regen time drops, and your DWG opens smoothly even on large plumbing layouts.

3. Consistent Shop Drawings

Every elbow, tee and reducing tee comes from the same definition, so line weights and symbol proportions stay identical across all sheets — exactly what consultants expect during IFC and as-built approvals.

4. Ready for Tool Palettes

Drag the blocks into your AutoCAD Tool Palette once, and they stay one click away in every future project.

How to Use These PP-R CAD Blocks in AutoCAD

1. Download and extract the ZIP file.
2. Open the DWG directly, or use INSERT (or simple copy–paste) to bring the block into your project drawing.
3. Click the block, then use the blue lookup grip to select the required PP-R size.
4. Use the stretch grips on the pipe block to extend the run to any length.
5. Place everything on the correct plumbing layer and continue drafting.

Compatibility: AutoCAD 2016 and all newer versions (dynamic block features required). Static views open in AutoCAD 2007 and above.

Who Should Download This PP-R Fitting & Pipe DWG?

• Plumbing draftsmen preparing water supply shop drawings
• MEP engineers working on residential, hotel and hospital projects
• Site engineers producing as-built and coordination drawings
• Students and interns learning plumbing layout drafting

Download PP-R Fittings & Pipe CAD Blocks (Free)

Click the button below to get the complete PP-R fittings and pipe dynamic block library in DWG format.

More Free CAD Blocks You May Need

• 👉 AutoCAD Dynamic Plumbing Blocks DWG Free Download
• 👉 Pipe Fitting CAD Blocks Free Download (Valves & Gauges)
• 👉 AutoCAD MEP Fittings Block Library Free Download
• 👉 Dynamic Blocks for HVAC & Chilled Water Piping DWG
• 👉 AutoCAD Victaulic Fittings Block Library
• 👉 Complete AutoCAD Blocks Library for MEP Systems

Frequently Asked Questions

Are these PP-R blocks really free to download?

Yes. This PP-R fittings CAD blocks free download is available at no cost and can be used in commercial MEP projects.

Do the blocks include reducing tees?

Yes. The reducing tee is a dynamic block where the main line size and the branch size are selected separately, so any combination can be drawn without editing the block.

Which AutoCAD version do I need?

AutoCAD 2016 or newer is recommended for full dynamic functionality. Older versions will open the file but may not support all parameters.

Can I add these to my Tool Palette?

Yes. Drag any block from the drawing area into an open Tool Palette and it will be saved for all future projects.

Final Thoughts

A well-built block library is the difference between a draftsman who finishes on time and one who redraws the same elbow a hundred times. Keep this PP-R fittings CAD blocks free download in your library, add it to your tool palette, and every plumbing layout you draw from today onwards will be faster and more consistent. Stay connected with MEPBase.com for more AutoCAD resources, LISP tools and MEP calculators.

Need ready-made AutoCAD blocks for sewage and drainage drawings? This Sewage Blocks DWG free download gives you a set of essential 2D drainage details — manhole, gully trap, grease trap, sedimentation chamber, sump pit, floor drain and more — drawn to scale in metric (mm). Drop them straight into your plumbing, drainage and sanitary layouts to save drafting time. Scroll down for the free download link, file details, and the full list of blocks included.

What is this DWG file?

This is a ready-to-use AutoCAD drawing containing a library of sewage and drainage blocks commonly used in plumbing and sanitary design. Every block is a 2D detail drawn to standard proportions, so you can insert, copy and scale them directly into your project sheets. Because it is a standard DWG, it works in AutoCAD and almost every DWG-compatible CAD program — making it a quick free download for draftsmen, MEP engineers and plumbing designers.

File details

Blocks included in this DWG

This free download contains the following sewage and drainage detail blocks:

All blocks are drawn in millimeters (mm). Open the DWG to view exact dimensions and any additional details.

How to use the blocks

1. Click the free download button above and save the .dwg file to your computer.
2. Open it in AutoCAD (2004 or newer) or any DWG-compatible CAD software.
3. Use Copy (Ctrl+C) and Paste (Ctrl+V) to bring a detail into your drawing, or insert it as a block.
4. Scale or adjust the block to match your project, then connect it to your drainage runs.
5. Check that the units (mm) match your drawing before inserting.

Who is this free download for?

Frequently Asked Questions

Is this sewage blocks DWG really free to download?

Yes. This is a 100% free download — you can use the drainage and sewage blocks in your AutoCAD plumbing drawings at no cost.

Which AutoCAD version do I need?

The file is saved in the AutoCAD 2004–2006 DWG format, so it opens in AutoCAD 2004 and every newer release, as well as most DWG-compatible CAD programs.

What units is the drawing in?

The blocks are drawn in millimeters (mm). Make sure your drawing uses the same units before inserting.

What blocks are included?

The free download includes a manhole, gully trap, grease trap, sedimentation chamber, sump pit, floor drain with opening slab and a pipe support detail.

Related free downloads

• PVC Pipe & Fitting Dynamic Blocks DWG — Free Download
• Drainage & Storm Water Shop Drawing — Free Download

Disclaimer: This DWG is shared for reference and educational use. Always verify sizes, materials and standards against your project specification and applicable plumbing/drainage codes before construction.

Looking for ready-made AutoCAD dynamic blocks of PVC pipes and fittings? This PVC Pipe and Fitting DWG free download gives you a complete set of fully dynamic 2D blocks — elbows, tees, couplings, reducers, end caps and more — where a single block adjusts to multiple sizes using grips and the Properties palette. No more keeping dozens of separate blocks for every diameter: insert one fitting, pick the size, flip or stretch it, and it’s ready. Scroll down for the free download link, file details, and the full list of dynamic fittings included.

⬇ Download PVC Pipe & Fitting Dynamic Blocks (Free)

Free download — no sign-up required. File format: .dwg | Size: ~7.5 MB

What is this DWG file?

This is a ready-to-use AutoCAD drawing containing a library of PVC pipe and fitting dynamic blocks used in plumbing, drainage and water-supply design. Unlike ordinary static blocks, these are parametric dynamic blocks: each fitting carries built-in parameters and actions, so you can change its size, flip it, or stretch it directly with grips — without exploding or redrawing anything. One block covers a whole range of sizes, which keeps your drawing light and your block library clean. Because it is a standard DWG, it opens in AutoCAD and most DWG-compatible CAD programs, making it a quick free download for draftsmen, MEP engineers and plumbing designers.

Why dynamic blocks?

File details

Dynamic fittings included in this DWG

This PVC pipe and fitting library includes the following dynamic 2D blocks, each adjustable to a range of sizes (open the file to view the complete set):

The exact blocks and size ranges may vary; open the DWG to confirm the full list for your project.

How to use the dynamic blocks

1. Click the free download button above and save the .dwg file to your computer.
2. Open it in AutoCAD (2007 or newer) or any DWG-compatible CAD software.
3. Copy the fitting you need into your drawing (Ctrl+C / Ctrl+V) or insert it as a block.
4. Select the block — blue dynamic grips appear. Use the size dropdown in the Properties palette (or a lookup grip) to set the diameter.
5. Use the flip grip to mirror it and stretch grips to adjust length or fit, then connect it to your pipe runs.
6. Check that the units (mm) match your drawing before inserting.

Who is this free download for?

Frequently Asked Questions

Are these PVC fittings dynamic blocks?

Yes. Every fitting in this free download is an AutoCAD dynamic block — you can change its size, flip it, and stretch it using grips and the Properties palette, so a single block works for multiple diameters.

Is this PVC pipe and fitting DWG really free to download?

Yes, it is a 100% free download. You can use the dynamic blocks in your AutoCAD plumbing and drainage drawings at no cost.

How do I change the size of a fitting?

Select the block and either pick the size from the dropdown in the Properties palette or drag the lookup/stretch grip. The block updates automatically — no exploding or redrawing needed.

Which AutoCAD version do I need?

The file is saved in the AutoCAD 2007–2009 DWG format, so it opens in AutoCAD 2007 and every newer release. Dynamic block editing is fully supported from AutoCAD 2006 onward.

What units is the drawing in?

The blocks are drawn in millimeters (mm). Make sure your drawing uses the same units before inserting.

Related free downloads

• Plumbing Legend & Symbols DWG — Free Download
• Drainage Pipe Layout DWG — Free Download

Disclaimer: This DWG is shared for reference and educational use. Always verify sizes, materials and standards against your project specification and applicable plumbing codes before construction.